Geodes have always been a source of wonder with their captivating interiors filled with pure mineral deposits. However, as time passes, these natural treasures can accumulate dirt and minerals, diminishing their beauty.
But fret not!
Geodes, with their captivating crystalline interiors, are visually enchanting and revered for their energy and spiritual attributes. Like any object interacting with various energies, ensuring that your geode remains pure and untainted is vital. Over time, negative vibes or stagnant energies may accumulate.
Do you know geode is the most expensive crystal that needs your attention to clean correctly?
So, let’s clean them with the best and effective methods.
Method 1: A Routine Cleaning with Laundry Detergent and Water
Cleaning your Geode to restore its natural beauty is simple and effective. Begin by selecting a container that comfortably accommodates your Geode.
Next, add some laundry detergent to the container and fill it with a small amount of water.
Pay close attention to the edges of the Geode, where dirt often accumulates. Gently scrub the surface with a toothbrush, removing any stubborn dirt. Once the Geode is thoroughly cleaned, rinse it diligently to eliminate any detergent residue, leaving it sparkling and pristine.
Method 2: Soaking in a Bleach Solution
Soaking your Geode in a bleach solution is the way for more intensive cleaning. Prepare the solution by mixing 3/4 cup of bleach with a gallon of water.
Submerge the Geode completely in the solution and allow it to soak for at least an hour, giving the bleach ample time to dissolve mineral deposits and impurities from the surface. After the soaking period, wash the Geode thoroughly with warm water to remove all bleach traces.
This method is particularly effective in restoring the Geode’s natural luster and shine.
Method 3: Denture Cleaner and Toothbrush
A denture cleaner and a toothbrush are fantastic approaches to cleanse your Geode effectively. To begin, create a solution by mixing half a cup of baking soda in a water bucket. Place the Geode in the solution and let it soak overnight.
The baking soda will work its magic, dissolving accumulated minerals and impurities on the surface. Once the soaking process is complete, carefully rinse the Geode with water and use a soft cloth to dry it thoroughly. You can apply a suitable sealer to preserve the Geode’s beauty and prevent further damage.
Other Methods to Cleanse Geode Crystals
Here are the more ways you can cleanse your geode crystals.
1. Rinse your geodes
To remove iron oxide, you need to rinse your geodes in water. Use a brush and gently brush the inside of your geode with a wet sponge or paper towel. Do not rub or scrub the geodes. After you are done, rinse your geodes in clean water.
Remove any dirt or debris that has stuck to your geodes. You will know if you have removed all the dirt from the geodes because they should look shiny and clean. You should be careful not to get any water inside the geodes.
2. Put on protective gloves and Google
When you wash the geodes, wearing gloves and goggles is a good idea. Protect yourself from getting the minerals and chemicals on your hands and eyes.
3. Mix a cleaning solution
Before you start washing the geodes, make sure you prepare a cleaning solution. Mix one cup of vinegar with two cups of water.
Use a plastic cup to mix the solution. Place the geodes inside a bowl or bucket. Soak the geodes in the solution for about 10 minutes before rinse them.
4. Soak the geode in wood bleach for a few hours
The next step is to soak the geodes in the wood bleach solution. Add two teaspoons of wood bleach to two quarts of water. Let the geodes soak in this solution for about a few hours.
5. Keep soaking the geode until it’s clean
After cleaning the geodes, rinse them under cold running water for about five minutes. Next, put them in a container with a lid. This will keep them from drying out.
You may think that soaking the geodes in wood bleach wastes time, but you will be surprised by what happens. You will be amazed at how much dirt and dust has accumulated on them. The acid in the wood bleach cleans the geodes and removes the dirt and dust.
How to Polishing Geodes Crystals
Polishing geode crystals is a rewarding process that enhances their natural beauty.
Here’s a brief guide on how to do it:
1. Sand your geodes
Before you polish your geodes, you must first sand them. If you do this, your polishing process will be much easier. Sanding your geodes is very easy.
All you have to do is use fine-grit sandpaper. You can also use coarse-grit sandpaper if you want. This is a technique that you will be able to use with any stone. If you have some polishing compound, you can also use this.
2. Put on protective goggles
Wear safety goggles when you are sanding. Goggles will help you to avoid hurting your eyes. Sanding without goggles is much more dangerous than using protective goggles.
To do this properly, you must get the correct size goggles. You can measure your eyes to find the correct size.
3. Polish your rocks
Different fabrics can be used to give your geode a final polish. Jeans, for example, are sturdy and can be rubbed down to create a smooth finish. This type of fabric is great for commercial applications as it has a long-lasting finish that won’t chip or fade.
So, now you’ve learned three fantastic methods to cleanse geodes and bring out their true beauty. You can easily remove dirt and mineral deposits by following the routine cleaning method, soaking them in bleach, or utilizing a toothbrush and denture cleaner. Bear in mind the details and preserve your geodes by cleaning the crevices and applying a suitable sealer. So, enjoy the remarkable transformation and the natural wonders geodes bring into your life!
Now you can share this with your friends when they ask you, “How to clean Geodes?”